Attach one end of the copper tubing to the refrigerator's water pipe, using a nut and ferrule.
How to Connect a Water Line to Your Refrigerator
Important: Make sure you leave extra tubing coiled behind the refrigerator, so you can move the refrigerator when necessary.
Cut the cold water line under the sink or in the basement and attach a copper T-fitting. Attach a water valve to the T-fitting. This will control the water flow and water pressure to the refrigerator. Be sure to put a gasket seal between the valve and the T-fitting. Attach the free end of the copper tubing to the valve. Now the refrigerator is connected. Make sure the threads are facing the end of the line.
Thread the ferrule from the kit onto the new line. Wrap the remaining male threads on the quick-tee adapter with thread-seal tape.
Insert the new water line into the opening on the tee. Slide the compression nut over the male threads and tighten it on the adapter. Tighten all three nuts on the quick-tee adapter with pliers or an adjustable wrench.How to Connect an Ice Maker Like a Pro - Ask This Old House
Do not twist the nuts too tight as this could damage the supply valve, the supply line and the adapter. Place the end of the water line you intend to connect to the refrigerator into a 5-gallon bucket. Turn the cold water supply valve on beneath the sink.
Let 1 or 2 gallons of water run through the new line to remove the air. Turn off the supply line. Slip the remaining compression nut and ferrule over the refrigerator end of the new water line.
Connect the line to the water line connector on the back of the refrigerator. Turn the supply line on once again. Watch for leaks at all the connections.
Tighten the connections slightly if you see a leak. Remember to orientate the ferrule in the right direction, tapered side towards the fitting like you see here.
To cut it, use your utility knife and cut any excess off as square as possible just like this. For the connections, the same basic techniques apply for this part and they could be connected together in 2 different ways like before using either a push or compression coupling.
The push coupling is pretty straight forward and installs the same way as the T I just showed downstairs, just make sure both ends are fully inserted before attempting to turn the water on. If you decided to go with the compression coupling, make sure both pipe ends are cut straight, slip on the retainer nut, ferrule, brass sleeve and tighten everything together.
With the refrigerator out of its hole, go ahead and proceed to testing.
Then open up the valve for the fridge connection and do the same thing. Time for a nice refreshing drink after all that work.
How do you hook up water to a refrigerator
If you guys enjoyed this tutorial, please give it a thumbs up and share it with your friends, and until the next one thanks for watching. Tip 4 days ago.
Connecting a water line for a refrigerator icemaker and water dispenser is easy with a convenient tee-fitting and flex hose supply tubing. A refrigerator with an automated ice maker and a built-in water dispenser does absolutely nothing if you do not have a water line to connect to it.
I know some will call me crazy ,but, if you hook the line up to a hot water line you will have less problems with your ice maker. In my area we have very hard water and the heating of the water tends to make the lime drop out in the water heater so we hook them to hot water lines to take advantage of the filtering effect.
With the length of line and the small amount of water used at one time hot water will never make it to the refrigerator so that is not a concern.
The story and how-to photos cover tapping into an existing water pipe (the toughest part of the job) and attaching copper tubing to the fridge. If you're replacing. Having a refrigerator with a water and ice dispenser is very convenient. To get the best performance, connect the water supply line. There is a chance that you. Imagine the convenience of having cold water or ice cubes any time you want them -- no more filling up pitchers to keep in the refrigerator or waiting for ice cube.
I have been doing this for 40 years and it has proven worthwhile. Reply 3 days ago. If that hot water is coming from a hot water tank, you might want to change that up because the accumulation of sediment in at the bottom of the tank is very unhealthy and if you consume it, you might get real sick.
I understand that you water is hard, but maybe it would be better to get a dedicated filter for your cold water to fix the problem. By JulioC www.